CYCLUS TOOLS snap.in tool for bottom bracket compatible with Panasonic Z6 54.0 torque sensor. Suitable for: bottom bracket with PANASONIC torque sensor (threaded guide art. no.: 7202771).

Thanks to this extractor, it is possible to assemble and disassemble the bottom bracket of the Panasonic electric motor, which houses a torque sensor. For full operation of the tool, the support art. no.: 7202750 and any additional components such as an adapter or guide are required. The use of the snap.in threaded guide (art. no.: 7202771) is recommended.

With this combination of support, extractor, and appropriate guide, professional assembly and disassembly of the bottom bracket can be performed without slipping or tilting. An additional advantage is that this guide can also be used with other tools from the snap.in family.

Note: observe the tightening torque specified by the manufacturer for each bottom bracket assembly.

Application: first remove the crank arm, then the larger cover, then the smaller cover, and wrap the cable around the axle. This operation is necessary to prevent the cable or connector from being crushed between the extractor and the lock nut. At this point, apply the extractor to loosen the lock nut. During assembly, perform the operations in reverse order.