CYCLUS TOOLS snap.in lock nut extractor compatible with Shimano Steps 6100 and 8000, code Z16 51.0. Compatible with: Shimano Steps 6100, Steps 8000.

The lock nut extractor is used for installing and removing the lock nuts of the Shimano Steps 6000 e-bike motor. To ensure a safe transfer of the required tightening torque, the tool is secured to the motor axle via its integrated guide and connected to the lock nut using a push-and-pull mechanism. This allows the tool to apply high torque when loosening or tightening the lock nut, without the risk of slipping.

The tool can be used with the snap.in tool holder (art. 7202750) or with a 32 mm combination wrench. When tightening, pay attention to the torque recommended by the manufacturer. To check the tightening torque, use a 3/8'' torque wrench (art. 720115).

Note: the lock nut extractor cannot be used with power tools.